How the Smart-Barrow Electric Wheelbarrow Kit Works

Smart-Barrow is an electric drive kit that converts a standard single- or double-wheel wheelbarrow into a powered hauling tool. You keep the wheelbarrow you already own, swap in a motorized wheel, add a controller and thumb throttle, and slide in two Dewalt or Milwaukee batteries. Developed by a professional landscaper, every kit is designed, assembled, and tested in the United States.

Instead of pushing the full load yourself, you steer while the motor does the heavy work, moving up to 500 lbs with ease. The result is less strain on your body, faster trips across the jobsite, and a drive system built to last as long as the wheelbarrow it’s attached to.

Learn More About Us

What Makes Up the Smart-Barrow Kit

Four main components work together to put power exactly where you need it:

  • The Smart-Barrow Wheel
    A motorized hub wheel replaces your current wheel and brackets. The motor is built to last, with a life expectancy exceeding 3,000 hours. The wheel is available with a wide turf tire (16×6.5-8) or a narrow turf tire (4.80/4.00-8) so it matches the tire size your wheelbarrow already uses.

  • The Controller and Battery Plate
    An aluminum plate mounts between the wheelbarrow’s handles using the bolts that already hold the legs in place. It carries the waterproof motor controller and the battery mounts, keeping the electronics up high and out of the way.

  • The Thumb Throttle
    A thumb throttle mounts on the handle, so you control the motor without taking your hands off the wheelbarrow. For hilly sites, an optional regenerative braking add-on gives you a second thumb lever that works as a brake on downhill runs.

  • The Batteries
    The kit runs on two common Dewalt or Milwaukee batteries, and no other brands are compatible at this time. We recommend 5Ah batteries, since larger ones simply add weight. In most applications, one set of two 5Ah batteries gets you through a full day. Heavy material like concrete or stone combined with steep hills may call for a second set.

Wondering if Smart-Barrow is a good fit for you? Our team can help!

Installs in Minutes, Built to Perform on the Job

On most wood-handled wheelbarrows, installation takes about 10 to 20 minutes with regular hand tools. For most wheelbarrows, all you need is a 1/2″ socket or wrench and a Phillips screwdriver. You replace the wheel and brackets, mount the plate between the handles, connect the controller to the wheel, attach the thumb throttle, secure the cable raceways that protect the wiring, and slide in your batteries. If you can assemble a wheelbarrow, you can install the kit, and our team is a call or email away if you want step-by-step help. Steel-handled wheelbarrows need about 10 self-tapping screws, and the kit includes only wood screws.

Once it’s running, hills are where Smart-Barrow works best. The motor provides the torque for uphill loads, and the kit adds only about 3 to 5 lbs to your wheelbarrow. The motor connections and controller are waterproof, so rain isn’t a problem. The one exception is the battery connection plates, which can’t be made fully waterproof, so protect them from excess moisture and keep them clean and dry. And if your batteries run out of charge, the wheelbarrow still pushes easily in forward or reverse without power.

Want to see each step? See the full install process or visit our FAQ for more information!

Find the Right Setup for Your Wheelbarrow

Smart-Barrow is available for both single-wheel and double-wheel wheelbarrows. Choose the kit that matches your brand: Scenic Road, Jackson, A.M. Leonard (slight modifications required during installation), or Brentwood. Using a different brand? Compare your wheelbarrow to the fitment guides on our Resources page, or contact us to verify fitment before you order.

When you order, you’ll also choose your current tire size, either narrow (4.80/4.00-8) or wide (16×6.5-8), and whether your handles are wood or steel. Nearly all Brentwood wheelbarrows use the wide tire. You can also add regenerative braking to any kit that has a push button to turn it on. The first generation with the toggle switch is not “regen ready” but can still be retrofitted, it just requires the controller to be returned to us for some changes. Wheelbarrow not included.

Every kit includes free shipping in the continental USA and a one-year warranty, and replacement parts are available for everything in the kit. Not sure about fitment? Contact us and we’ll confirm it before you buy.

Buy Now!